Comments for Team Seacats

Comment on Sanding my Crack by your wife

your wife — Thu, 05 Jan 2012 18:26:39 +0000

dear holy god, i wish i had never seen this photo. i said those faeries would try to get you for cutting down their trees.

Comment on Garage Mahal! by Shayna Ivey

Shayna Ivey — Sun, 09 Oct 2011 10:44:54 +0000

When I originally commented I clicked the -Notify me when new comments are added- checkbox and now each time a comment is added I get four emails with the identical comment. Is there any manner you may remove me from that service? Thanks!

Comment on Sanding my Crack by Jeff

Jeff — Fri, 07 Oct 2011 12:47:06 +0000

For spider removal: Demon WP. Spray perimeter inside as needed. It leaves a chalky residue but that can be swept up.

Comment on High Speed Judging by Lana Fiorita

Lana Fiorita — Thu, 06 Oct 2011 07:03:38 +0000

Oh my goodness! a tremendous article dude. Thanks Nevertheless I’m experiencing challenge with ur rss . Don?t know why Unable to subscribe to it. Is there anybody getting equivalent rss drawback? Anybody who is aware of kindly respond. Thnkx

Comment on Sanding my Crack by Sanding my Crack « Team Seacats | HVLP Paint Gun

Sanding my Crack « Team Seacats | HVLP Paint Gun — Tue, 30 Aug 2011 03:38:25 +0000

[...] to curing in my HVLP paint gun. Of note, I did purchase a new HVLP gun from Northerntool … See more here: Tags: hvlp, hvlp paint gun, hvlp paint guns, nasty-chemicals, northerntool, paint-gun, [...]

Comment on It’s Stronger than Air! by alanosauras

alanosauras — Sun, 14 Aug 2011 12:26:49 +0000

yikes. That’s an unwanted surprise. Thanks for posting.

Comment on Progress ~sigh~ Finally! by Jake

Jake — Fri, 10 Jun 2011 15:03:05 +0000

Thanks Dave. All fasteners that touch the treated wood are hot-dipped galvanized (the large ones in the wall that have the welded washers are not – but they’re not in the treated lumber). I wanted to find solid PVC to make the mounts from but couldn’t source it quickly locally…so I went with what what was readily available. I probably should have put some clear packing tape behind the powder coated hanger brackets to provide some additional isolation – but hopefully the stain, caulk, and the powder coating will provide enough of a barrier.

Comment on Progress ~sigh~ Finally! by David

David — Fri, 10 Jun 2011 13:21:02 +0000

Looks good Jake except the new treatment in the treated wood will eat up metal unless it is stainless steel or hot dip galvanized.

Comment on The Future America’s Cup by Dave Mosley

Dave Mosley — Mon, 31 Jan 2011 13:02:32 +0000

You’re Right, Music breakdown by oat Class
AC45 Korn
A Cat/N 20 STP
Laser/H16 Ozzy
Melges 20 /Viper Poison
J24 Eagles
Old America;s Cup Peaches and Herb
Jet Ski Justin Bieber

Comment on Red Right Returning by david strickland

david strickland — Sat, 25 Dec 2010 00:23:43 +0000

them be some awesome gates fer sure!! I have a router if you need to get fancy on the tops. Merry Christmas!