Gettin’ Shiny
by Jake on Feb.22, 2007, under One Meter
The one meter project is shaping up…I’m getting close to the molding process. Truth be told, I had a terrible problem with trying to put some clear coat on. I used some old paint and ended up with drips and sags that had to be sanded away – I lost most of last weekend’s time doing just that. However, two nights ago, I was able to lay down a nice smooth coat of clear (new enamel) and I started wetsanding last night with 1000 grit. Once the slight orange peel was sanded away, I gave it a quick sanding with 1500 grit and then started buffing by hand. I’ve done one pass over the entire hull with rubbing compound but given it two on the deck. I’m tempted to try to buff it with my real buffer, but I’m afraid that it might sling the plug across the shop.
Originally uploaded by Team Seacats.
